Some neat devices for the hobbyist

Ok, well, the year is coming to an end and I’ve seen a number of neat devices out there but here are some that I own. The next year coming up is a going to be an interesting year methinks especially since there’s gonna be some big changes in my life, not to mention the fact that I’ve quit smoking for some time now.

Anyways, here they are:

Arduino NANO

Arduino NANO

This nifty little device is the Arduino NANO. Now, me being me I believe that the arduino’s are something akin to cheating since you don’t need a programmer, it runs right off USB and communicated directly with the computer. The small size of this device and the ease of use make it truly a neat device. Call me lewis ’cause I am starting to like the arduinos. They sell for as little as $14 on EBay (they are probably knockoff but work fine) and are strangely useful for bashing out simple stuff.

Mini PIR Unit

PIR Sensor

This little guy can detect motion (heat difference) up to 5M away. it only draws .15mA and costs only about $4 on Ebay. The interface is simple with two trim pots, one to set the sensitivity and one to set how long the signal stays high when triggered. I bought a whole bunch of these for a project I never finished (A distributed monitoring system) and I might make something cool out of them.

2.4Ghz Transceiver

2.4GHZ transciever

This little guy seems to work really well. Based off the┬ánRF24L01 chip, this transceiver will draw about 15mA at continuous load. If you’re using it intermittently, it’ll run at about 2mA. Alos, it was really hard to get an image of the pinout for this device since the seller kept saying they’d give it to me and never did. Here’s an image of the pinout.

transceiver pinout ripped from somewhere I don't remember (sorry)

You can get these devices for about $4-5 each. A real steal.

CP2102 USB to Serial out

CP2102 USB to IO

These guys are useful because you can plug a test device directly on to the usb port and not need a max232 or equivalent. It features a 3.3 and 5v port and works like a damn. Concievably you could use this with an intermediary to provide the SPI interface to the 2.4GHz Transceiver and use it to provide communication to other transceivers to the computer.

UltraSonic Transducer

Ultrasonic Transducer

This is the ultrasonic transducer. I was playing with it last night and it works really well. It measures anywhere from about 1 inch to 16 feet or so. Simply provide a short 10 to 100 us pulse to ‘trig’ and measure how long the ‘echo’ pin remains high. the ‘echo’ pin will go high after a delay once the trigger pin has been pulsed. I was able to get pretty good accuracy once I calibrated it and with some averaging routines I was abble to get resolutions of about .01″. Surely it wasn’t THAT accurate but it was close. These again were only like $6 each. It should be said, that with full measuring duty this device draws about 15mA.

Anyways, that’s what I’ve been playing with. Hopefully other people may purchase these little trinkets and have fun. EBay sure is an awesome place for the hobbyist like myself for weird knick-knacks!