Steve's Junk » dimensions http://smackaay.com A showcase of Steven Mackaay's stuff Sun, 11 Mar 2012 20:11:37 +0000 en hourly 1 http://wordpress.org/?v=3.3.2 A Drawing of a Servo, for reference. http://smackaay.com/2009/04/10/a-drawing-of-a-servo-for-reference/ http://smackaay.com/2009/04/10/a-drawing-of-a-servo-for-reference/#comments Fri, 10 Apr 2009 07:29:56 +0000 smackaay http://smackaay.com/?p=550 Well, my servos have all come in for a project I’ve been working on. These ones being some cheap Chinese servos that I picked up off Ebay. Here’s a photo of one of them.
Chinese 9G RC Servo Photo

Chinese 9G RC Servo Photo


Now that I have them I guess I have no excuse in not doing the project, especially since I bought so many of them, despite them being cheap. In starting my project I’ve decided to offer a PDF of a drawing for the servo since I had no idea how big they were or what they would measure until they arrived, thus, if anyone else wants the drawing, they can use the dimensions for their own purposes.
Here are a couple of pics of the drawing for reference.

Chinese 9G RC Servo drawing

Chinese 9G RC Servo drawing

Chinese 9G RC Servo Solid

Chinese 9G RC Servo Solid

As the project progresses I’ll review the functionality of the servos. After I had ordered them I had read that they are susceptible to outside interference, especially from the likes of human contact around the housing. From what I read, this made the servo “Freak out”. We’ll see I guess, I’m going to make a standard testbed circuit for testing anyways.

So, anyways, for anyone who wants it the drawing, here’s the PDF

Chinese 9G RC Servo PDF

Hopefully someone will find it useful.

]]> http://smackaay.com/2009/04/10/a-drawing-of-a-servo-for-reference/feed/ 0